setting up your new washing machine
_13
01 SETTING UP
STEP 3
Adjusting the levelling feet
When installing your washing machine, ensure that the power plug, the water supply and
the drain are easily accessible.
1.
Slide the washing machine into position.
2.
Level your washing
machine by turning the
leveling feet in and out as
necessary by hand.
3.
When your washing machine is level, tighten the nuts using
the wrench supplied with your washing machine.
STEP 4
Connecting the water and drain
Connecting the water supply hose
1.
Take the L-shaped arm fitting for the cold water
supply hose and connect it to the cold water
supply intake on the back of the machine.
Tighten by hand.
The water supply hose must be connected
to the washing machine at one end and to
the water tap at the other. Do not stretch the
water supply hose. If the hose is too short,
replace the hose with a longer, high pressure
hose.
2.
Connect the other end of the cold water supply
hose to your sink’s cold water tap and tighten
it by hand. If necessary, you can reposition the
water supply hose at the washing machine end
by loosening the fitting, rotating the hose, and
retightening the fitting.
For selected models with an additional hot water intake:
1.
Take the red L-shaped arm fitting for the hot water supply hose and connect it to the hot
water supply intake on the back of the machine. Tighten by hand.
2.
Connect the other end of the hot water supply hose to your sink’s hot water tap and tighten
it by hand.
3.
Use a Y-piece if you only want to use cold water.
WF8604SE-02612C_EN.indd 13
2009-02-05 ¿ÀÀü 9:48:19
Summary of Contents for WF8500BEA
