English - 35
03
CLEANING
Eco Drum Clean auto alarm function
After a wash, if it is detected that cleaning the drum is required, the “Eco
Drum Clean ” indicator on the display and the corresponding lamp on the
Cycle Selector light up. In this case, remove the laundry from the washing
machine, turn the power on, and clean the drum by performing the Eco
Drum Clean cycle.
If you do not perform the Eco Drum Clean cycle, the Eco Drum Clean
indicator on the display and the corresponding lamp on the Cycle Selector
are turned off. They will be turned on again after two washes are performed.
Note that this does not indicate that there is a problem with the washing
machine.
Although the Eco Drum Clean auto alarm function usually operates once
a month, the frequency may differ depending on how often the washing
machine is used.
If the alarm occurs, clean the debris filter as well (refer to the “
Cleaning the debris filter
“ section on page
36
). Failure to do so may decrease the performance of the Eco Bubble function.
Draining the washing machine in an emergency
If there is a power outage, drain all remaining water before removing your laundry.
1.
Unplug the washing machine from the electrical outlet.
2.
Open the
filter cover (A)
by pressing down and pulling its handle.
A
3.
Prepare a bowl.
The remaining water may be more than you expected. Use a
large bowl.
4.
Pull out the
emergency drain tube (C)
and put the end of the
emergency drain tube (C)
into a bowl.
B
5.
Hold the
emergency drain cap (B)
at the end of the
emergency
drain tube (C)
and slowly pull it out.
6.
Allow all the water to flow into a bowl.
7.
Reinsert the emergency drain cap and the emergency drain tube.
8.
Close the filter cover.
C
F700E_WF80F7E-03248A-02_EN.indd 35
2013-9-26 9:43:51
