32_
maintaining your washer
maintaining your washer
PURE CYCLE
TM
Pure Cycle is a self-cleaning cycle that removes mold that may occur inside the washing machine.
1.
Press the
Power
button.
2.
Press the
Pure Cycle
TM
button.
• Once the Pure Cycle button is pressed, the only
function that can be set is Delay Start.
3.
Press the
Start/Pause
button.
• If you press the Start/Pause button, Pure Cycle
begins.
•
Using Pure Cycle, you can clean the drum without using a cleansing agent.
•
Never use Pure Cycle when laundry is in the washing machine. This may cause damage to
the laundry or a problem with the washing machine.
•
If you want to use drum cleansing agent, use only 1/10 of the amount of the drum
cleansing agent recommended by the cleansing agent manufacturer.
(When using a
powder-type cleansing agent , remove the liquid detergent compartment.)
The Pure Cycle Auto Indicator Function
•
If the “
Pure Cycle
” button is lit after a wash, it indicates that
tub (drum) cleaning is required. In this case, remove the
laundry from the washing machine, turn the power on, and
clean the drum by running Pure Cycle.
•
If you do not run Pure Cycle, the “
Pure Cycle
” indicator
turns off. However, the “
Pure Cycl
e” indicator will light again
after two washes. Not running Pure Cycle at this point will
not cause a problem with the washing machine.
•
Although the Pure Cycle Auto Indicator appears once a
month or so, the frequency may differ depending on the
number of times the washing machine is used.
CAUTION
WF501ANW-03010B_EN.indd Sec4:32
WF501ANW-03010B_EN.indd Sec4:32
2011-06-30
4:05:37
2011-06-30
4:05:37
