cleaning and maintaining your washer
_29
PURE CYCLE
TM
Pure Cycle is a self-cleaning cycle that removes any mold from inside the washing machine.
1.
Press the
Power
button.
2.
Press the
Pure Cycle™
button.
Once you have pressed the Pure Cycle
button, the only function you can set is the
Delay Start function.
For WF365* models
Select the
Pure Cycle™
cycle by turning
the Cycle Selector.
3.
Press
the
Start/Pause
button. The Pure
Cycle cycle will start.
The Pure Cycle Auto Alarm Function
• If the “
Pure Cycle
” button is lit after a wash, it
indicates that tub (drum) cleaning is required.
In this case, remove the laundry from the
washing machine, turn the power on, and
clean the drum by running Pure Cycle.
• If you do not run Pure Cycle, the “
Pure
Cycle
” indicator turns off. However, the
“
Pure Cycle
” indicator will light again after
two washes. Not running Pure Cycle at
this point will not cause a problem with the
washing machine.
• Although generally, the Pure Cycle Auto Alarm
appears once a month or so, the frequency
may differ depending on the number of times
the washing machine is used
03 CLEANING AND MAINT
AINING
WF361_363_365-02832J-03_EN_20120829.indd Sec7:29
WF361_363_365-02832J-03_EN_20120829.indd Sec7:29
2012-08-31
12:38:21
2012-08-31
12:38:21
