manualshive.com logo in svg

Samsung WF316LAW, Service Manual

Share
Download
Samsung WF316LAW Service Manual Download Page 40

6-1

6. TROUBLE SHOOTING

-   As the micom wash machine is configured of the complicate structure, there might be the     
     service call.
     Below information is prepared for exact trouble diagnosis and suitable repair guide.

Caution for the Repair and Replacement

     Please follow below instruction for the trouble diagnosis and parts replacement.

1)  As some electronic components are damaged by the charged static electricity from the resin    

 

  part of wash machine or the human body, prepare the human body earth or remove the potential differ  
  ence of the human body and wash machine by contacting the power supply plug when the work contact 
  ing to PCB is executed.

2)  Since AC220~240V is applied to the triac T1 and T2 on P.C.B, the electric shock may occur by  

 

  touching and be careful that the strong and weak electricity are mixed.

3)  As the P.C.B assembly is designed for no trouble, do not replace the P.C.B assembly by the    

 

  wrong diagnosis and follow the procedure of the trouble diagnosis when the micom is not op   

 

  erated normally.

6-1. TROUBLE DIAGNOSIS

Summary of Contents for WF316LAW









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands