Samsung WF209ANW/XAA Manual Download Page 7

Water valve connections for the Detergent Drawer

 

Laundry Touch Up Paints

 

TOUCH UP PAINT, BLUE ONYX

DH81-11980A

TOUCH UP PAINT, IMPERIAL SILVER DH81-11981A
TOUCH UP PAINT, NEAT WHITE

DH81-11982A

TOUCH UP PAINT, STRATUS GRAY

DH81-11983A

TOUCH UP PAINT, TANGO RED

DH81-11984A

Stacking Kit :    (Model 

SK-3A1/XAA SK-4A/XAA

Samsung washers and dryers can be stacked to maximize usable space.   
An optional stacking kit is available for purchase from your Samsung retailer 

Items Packed With Washer 

BOLT-SPANER (10-13mm Wrench) DC60-40146A 

ASSY HOSE WATER  DC97-15691A  

ASSY HOSE WATER  DC97-15692A  

MANUAL-BOOK DC68-02535A  

CAP-FIXER DC67-00307A  

HOSE-HANGER DC62-10278A 

 

When using non-HE 
detergents, or using 
too much detergent 
for the water hard-
ness and soil level of 
the clothing, over 
sudsing will occur. 
When this happens 
there will be leaks out 
of the detergent 
drawer and door. 
Please advise con-
sumer of proper de-
tergent usage.

 

Valve #1 

Valve #2 

Valve #3 

MAIN (C) 

BLEACH 

MAIN (H) 

It is normal for some water to remain in 
Detergent Drawer after it completes 
washing.  Bleach is usually flushed out 
into the tub at the beginning of the wash-
ing. Also, its compartment is washed 
again during the following rinse cycle, 
removing any remnants. 

 

 PNK 

7

Summary of Contents for WF209ANW/XAA








Reviews: