Samsung WF0702WJ series, User Manual

Page: 28 / 192

28_
washing a load of laundry
washing a load of laundry
Washing clothes using the cycle selector
Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control”
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Turn on your sink’s water tap.
2. Press the Power button on the washing machine.
3. Open the door.
4. Load the articles loosely into the drum one at a time, without overfilling it.
5.
Close the door.
6. Add detergent and, if necessary, softener or prewash detergent, into the appropriate
compartments.
Pre-wash is only available when selecting the Cotton, Synthetics, Denim, Bedding, Dark
Garment, Daily Wash, Baby care cycles. It is only necessary if your clothing is heavily soiled.
7.
Use the
Cycle selector
to select the appropriate cycle according to the type of material:
Cotton, Synthetics, Denim, Bedding, Dark Garment, Daily Wash, Eco Drum Clean, Super Eco
Wash, Outdoor Care, Baby Care, Wool, Hand Wash. The relevant indicators will illuminate on
the control panel.
8. At this time, you can control the wash temperature, the amount of rinses, the spinning
speed, and the delay time by pressing the appropriate option button.
9. Press the start/Pause button and the wash will begin. The process indicator will light up
and the remaining time for the cycle will appear in the display.
Pause Option
Within 5 minutes of starting a wash, it is possible to add/remove laundry items.
1. Press the start/Pause button to unlock the door.
The door cannot be opened when the water is too HOT or the water level is too HIGH.
2. After closing the door, press the start/Pause button to restart the wash.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1. Open the door.
2. Remove laundry.
WF0602WJ-02907H-04_EN.indd 28 2012-4-12 10:40:23