background image

SAMSUNG

  Washing Machine Owner’s Instructions 

A-3

Grounding instructions

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk 

of electric shock by providing an escape wire for the electrical current. This appliance is equipped with 

a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is 

properly installed and grounded.

  WARNING:

Improper use of the grounding plug can result in a risk of electric shock.

Consult a qualified electrician or service technician if you do not understand the grounding 

instructions or if you are not sure if the appliance is properly grounded.

Use of extension cords

A short power-supply cord is provided to reduce 

the risks resulting from becoming entangled in or 

tripping over a longer cord.

Longer cord sets or extension cords are available 

and may be used if care is exercised in their use.

If a long cord or extension cord is used,

1. 

The marked electrical rating of the cord set 

or extension cord should be at least as great 

as the electrical rating of the appliance.

2. 

The extension cord must be a grounding-

type 3-wire cord and it must be plugged 

into a 3-slot outlet.

3. 

The longer cord should be arranged so that 

it will not be pulled on by children or tripped 

over unintentionally.

  WARNING:

Do not cut or remove the third (ground) prong from the power cord under any 

circumstances.

Preferred method of grounding

Plug the three-prong power cord into a properly grounded outlet of standard 120 VAC, 60 Hz. Your 

washer should be the only appliance on this circuit.

Safety Precautions

Save These Instructions

Summary of Contents for WF-J1054C

























Reviews: