Be sure to first follow the
Quick Start Guide on
the reverse side of this guide
to complete initial setup
of your headset.
Features and
Functions Guide
SAMSUNG
Bluetooth Mono Headset
WEP200
To turn the headset on
,
Press and hold the Multi-Function button for
4 seconds until you see 4 blue flashes on the
indicator light, then release.
You will hear a tone and see the indicator light
flashes while the power is on
(see
Meaning of the indicator light
of this guide).
To turn the headset off
,
Press and hold the Multi-Function button for
4 seconds until you see 2 blue flashes on the
indicator light, then release.
You will hear series of 2 tones and see the indicator
light stops flashing.
Turn headset on/off
Wear the headset on your ear.
In general, you will get better performance
when there are no obstructions
(including parts of your body)
between the headset
and the phone.
Wear the headset
Change for use on other ear
Use enhanced features
Meaning of the indicator light
Depending on which ear you are going to wear the
headset, simply adjust the hook accordingly.
Press [
] on the side of the headset to increase
the volume level and press [
] to decrease the
volume level.
Adjust the volume
Making a voice activated call
If the phone’s voice recognition feature is on, you can
make a voice activated call.
Press the Multi-Function button once. You will hear the
voice-activation tone.
Say the name of the person you wish to call.
Depending on your phone, this feature may not be
supported.
Redialing the last number
If the phone’s voice recognition feature is off, press and
hold the Multi-Function button for 2 seconds, twice.
If the phone’s voice recognition feature is on,
1
Press the Multi-Function button and listen for the
voice-activation tone. When you hear it, press the
button again to cancel the feature.
2
Press and hold the Multi-Function button to access the
recent call list.
3
Press and hold the Multi-Function button to make a call
to the last number you have dialed or received.
End a call
Press the Multi-Function button once.
Answer a call
• After you hear the ring tone, press the Multi-Function
button once.
• If you answer the call with your phone, you can transfer
the call to the headset by pressing the Multi-Function
button.
Reject a call
When you receive a call, press and hold the Multi-Function
button for 2 seconds to reject the call. Depending on your
phone's setting or type, you may only be able to mute the
ringer or this feature may not be supported.
Make calls
Enhanced features are available for phones that support the
hands-free Bluetooth profile and enhanced features.
•
Answer a second call
(switching between 2 calls)
When your phone notifies you of another incoming call while
you are on a call, press and hold the Multi-Function button for
2 seconds.
You can switch between calls by pressing and holding it for
2 seconds.
Depending on your phone, this feature may not be supported.
•
Place a call on hold
While you are on a call, press and hold the Multi-Function
button for 2 seconds.
To retrieve the call, press and hold the Multi-Function button
for 2 seconds again.
Depending on your phone, this feature may not be supported.
•
Switch off the microphone
Press and hold the Up volume control button to switch off the
headset's microphone.
To switch it back on, press and hold the button again.
Flashes in
blue every
8 seconds.
Quick series
of 2 tones.
(Active mode
starts.)
The headset is in Active mode.
• The headset has an active
call in progress.
• You can talk up to 4 hours.
Flashes in
blue every 3
seconds.
Quick series
of 2 tones.
(Standby
mode starts.)
The headset is in Standby mode.
• The headset is waiting
for a call.
• The headset can be in
Standby mode up to 70
hours.*
Flashes in
red instead
of blue.
5 tones every
20 seconds.
The battery of the headset is
low. Recharge the battery.
• There is only 1 minute of
talk time left.
Important:
Light
Tone
Status
*Depending on the phone type and usage, the actual time
may vary.
Left
Right
Troubleshooting
My phone does not find my headset.
Make sure the blue indicator light on your
headset turns on when your phone is
searching for devices.
My headsest worked before but now it is
not working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone.
If the Bluetooth feature has been turnned off
or was turned on only temporarily, you may
need to restart the Bluetooth feature.
If you have confirmed the Bluetooth feature is
on in your phone, pair your phone and
headset again.
Headquarters:
1301 East Lookout Drive Suite 150
Richardson, TX 75082
Internet Address:
http://www.samsungmobileusa.com/
accessories
Customer Care Center:
1-888-987-4357
