English 23
Ins
tallation
C
3.
Hold the adaptor and turn
part (C)
in the
arrow direction to loosen it by 5 mm (*).
C
4.
Insert the adaptor onto the water tap,
and then tighten the screws while lifting
the adaptor.
5.
Turn
part (C)
in the arrow direction to
tighten it.
D
6.
While pulling down
part (D)
on the
water hose, connect the water hose to
the adaptor. Then, release
part (D)
. The
hose fits into the adaptor with a clicking
sound.
7.
To complete connecting the water hose,
see 2 and 3 on the “
Connecting to a
threaded water tap
” section.
NOTE
•
After connecting the water hose to the adaptor, check if it is connected properly by
pulling the water hose downwards.
•
Use a popular type of water taps. If the tap is square-shaped or too big, remove the
spacer ring before inserting the tap into the adaptor.
WD85K5410OX_03882L-00_EN.indd 23
2019/8/26 11:56:22
