English
English
55
Debris filter
It is advisable to clean the debris filter every 2 months to prevent its clogging. A clogged debris filter may
reduce the bubble effect.
1.
Turn off the washing machine, and unplug the
power cord.
2.
Drain the remaining water inside the drum. See the
Emergency drain
section.
3.
Open the
filter cover
.
-
TYPE 1: Push down the latch of the
filter cover
to open.
-
TYPE 2: Gently press the top area of the
filter
cover
to open.
4.
Turn the debris filter knob to the left, and drain off
the remaining water.
5.
Clean the debris filter using soft brushes. Make
sure the drain pump propeller inside the filter is
unclogged.
6.
Reinsert the debris filter, and turn the filter knob
to the right.
NOTE
• Some debris filters feature a safety knob that is
designed to prevent accidents by children. To open
the safety knob of the debris filter, push in and
turn it anticlockwise. The spring mechanism of the
safety knob helps open the filter.
• To close the safety knob of the debris filter, turn
it clockwise. The spring makes a rattling sound,
which is normal.
NOTE
• The “
Clean drain filter
” message appears on the control panel display after every 100 washes.
• If the pump filter is clogged, an information code of “
Check drainage
” appears on the screen.
CAUTION
• Make sure the filter knob is closed properly after cleaning the filter. Otherwise, this may cause a leak.
• Make sure the filter is inserted properly after cleaning it. Otherwise, this may cause an operational
failure or a leak.
U-PJT_COMBO-MD_SimpleUX_WEB_SSEC-02__EU_English.indd 55
2022/4/19 19:45:42
