English 55
Tr
ouble
shoo
ting
Problem
Action
OC
Water is overflowed.
•
Restart after spinning.
•
If the information code remains on the display, contact a local
Samsung service centre.
LC
Check the drain hose.
•
Make sure the end of the drain hose is placed on the floor.
•
Make sure the drain hose is not clogged.
•
If the information code remains, contact a customer service
centre.
NOTE
When the washer displays the “LC”/“LC1” code, the washer
do draining for 3 minutes. During this time, the Power
button is inoperative.
LC1
FC
Check the fan motor.
•
Power off and power the machine on after 2-3 minutes, and
then try again.
UB
Spinning does not work.
•
Make sure laundry is spread out evenly.
•
Make sure the washing machine is on a flat, stable surface.
•
Redistribute the load. If only one item of clothing needs
washing, such as a bathrobe or pair of jeans, the final spin
result might be unsatisfactory, and an “
UB
” check message
will be shown in the display.
3C
Check the Motor for operation.
•
Try restarting the cycle.
•
If the information code remains, contact a customer service
centre.
UC
The electronic control needs to be checked (Over Voltage Error).
•
Check the PCB and wire harness.
•
Check if power is supplied properly.
•
If the information code remains, contact a customer service
centre.
Low voltage detected
•
Check if the power cord is plugged in.
•
If the information code remains, contact a customer service
centre.
WD75M4453JW_03786A_EN Basic.indd 55
2017/4/7 10:12:18
