Engl
ish
English
46
Maintenance
Keep the washing machine clean to prevent deteriorated performance and to preserve its life cycle.
Drum Clean+
Perform this cycle regularly to clean the drum by removing bacteria from it. This cycle heats the water
between 60 °C and 70 °C, and it also removes accumulated dirt from the rubber door gasket.
1.
Tap .
2.
Turn the
Navigation dial
to select
Drum Clean+
.
3.
Tap and hold .
CAUTION
• Do not use any cleaning agents for cleaning the drum. Chemical residue in the drum may cause damage
to the laundry or the drum of the washing machine.
• To prevent limescale, add the proper amount of detergent according to your local water hardness or add
a water softener additive together with the detergent.
Drum Clean+ reminder
Depending on the model, the
Drum Clean+
reminder is either an icon or an LED.
For icons, the icon lights up on the control panel.
For LEDs, the LED lights up next to
Drum Clean+
, or on the option area of the control panel.
• The
Drum Clean+
reminder blinks on the control panel once every 40 washes. It is advisable to perform
Drum Clean+
regularly.
• When you first see this reminder blinking, you can ignore the reminder for 6 consecutive washes. From
the 7
th
wash, the reminder no longer appears. However, it appears again on the second 40
th
wash.
• Even after the last process is terminated, the "
0
" message may remain.
• You can record the running count of the
Drum Clean+
cycle by tapping . This does not stop or turn off
the machine but marks your cycle count.
• Even if "
0
" does not disappear, the machine operates normally.
• It is recommended to run the cycle regularly for hygienic purposes.
Untitled-1 46
2022-04-15 11:49:07
