English - 29
03
USING
Delay End
You can set the washing machine to finish your wash automatically at a later time, choosing a delay of between 3
to 19 hours (in 1 hour increments). The hour displayed indicates the time when the wash will finish.
1.
Turn on the water supply to the washing machine.
2.
Add your laundry loosely into the drum without overfilling it.
3.
Press the
Power
button to turn the power on.
4.
Add detergent, and if necessary, softener or prewash detergent into the appropriate compartments in the
detergent drawer.
5.
Select the appropriate cycle and options for the load.
6.
Press the
Delay End
button repeatedly until the delay time is set.
7.
Press the
Start/Pause
button.
The lamp on the Delay End button will light up, and the clock will begin counting down until it reaches the
set time.
8.
To cancel the Delay End function, turn the washing machine off and then turn it on again by pressing the
Power
button.
My cycle
The My Cycle function allows you to customize your own course so that you can select it using just one button.
Setting My Cycle
1.
Press the
Power
button to turn the power on.
2.
Turn the Cycle Selector to select a cycle.
3.
Select additional functions, if required.
4.
Hold down the
My Cycle
button for longer than 3 seconds to save the selected cycle and functions.
When saving is complete, the relevant indicators of the selected cycle and functions will blink for 3 seconds.
If you press and release the
My Cycle
button for less than 3 seconds, the selected cycle and functions will
not be saved and the last saved cycle and functions will be displayed.
Using the saved My Cycle
1.
Turn on the water supply to the washing machine.
2.
Add your laundry loosely into the drum without overfilling it.
3.
Press the
Power
button to turn the power on.
4.
Add detergent, and if necessary, softener or prewash detergent into the appropriate compartments in the
detergent drawer.
5.
Press and release the
My Cycle
button for less than 3 seconds. The "My Cycle " indicator will light up, and
the relevant indicators of the selected cycle and functions will blink.
6.
Press the
Start/Pause
button to start the wash.
Untitled-1 29
2015-11-06 4:25:16
