English - 29
W
ASHING A LOAD OF LAUNDR
Y
USING DRY COURSE
Refer to the label of drying capacity and be sure to put in the clothes to the lower level than the marked line
for the dried clothes of 7.0kg.
1.
Open the door, put in the clothes and close the door again.
2.
Press the
Power
button and then press the
Drying
button.
: The standard course will be selected automatically.
Drying is not available for Eco Drum Clean, Air Wash and Wool courses.
3.
Select
Drying
button as follows.
Drying Programs
• Every press of this button will select drying type repeatedly in the following order:
Cupboard
Iron
Small Load
Low Temp.
Time
(30 min.
1:00 h
1:30 h
2:00 h
2:30 h)
Cupboard
Drying Type
Information
Max
Load
Time
(Max Load)
Time
(Soft Keep)
Auto
Drying
Cupboard
Standard: Dries the laundry.
7.0 kg
340 min
31 min
Iron
For leaving items partially damp
so that it can be easily ironed.
7.0 kg
170 min
31 min
Small Load
Dries 3~4 towels or 2 shirts.
-
40 min
0 min
Low Temp.
Dries the laundry at a Low Temp.
to protect the texture of the
laundry.
7.0 kg
310 min
31 min
Time Drying
You can select the appropriate
drying time depending on the
texture, quantity, and moisture.
-
30/60/90/
120/150 min
0 min
• It automatically displays Drying Time by sensing the weight of clothes before drying for
increasing the drying effect.
• For any loads of laundry, you can use the Auto Dry function. If you fi nd that the
laundry is not completely dried, use the Time Dry function additionally.
• If both the spin and drying cycles are selected, the spin speed is automatically selected
to enhance the drying effi ciency.
• When using the drying cycle, check if the water supply valve is opened.
• Soft Keep function is to prevent laundry from being wrinkled when the laundry is not
immediately removed after drying.
• While the Soft Keep function is running, “END” is displayed waiting for you remove the
laundry.
4.
Press
Start/Pause
button.
: It automatically performs an optimal function from washing to drying.
• The selected course can’t be altered after the start of drying.
• If cold water is not supplied, drying will not be performed.
• If you select Dry only, Spin is automatically selected as well to improve the drying
performance (except the Time Dry option) If you don’t want the Spin operation, please
manually unselect Spin by pressing the Spin button.
YUKON-03073P-04_EN.indd 29
YUKON-03073P-04_EN.indd 29
4/7/2016 11:31:30 PM
4/7/2016 11:31:30 PM