Samsung WD10T Series, User Manual

Page: 29 / 144

Engl
ish
English 29
Before you start
Initial setup
• When you turn on the washing machine for the first time, the screen shows the initial setup process.
Follow the on-screen instructions to complete it.
• Initial setup will not repeat after you’ve finalized it. In order to finalize the initial setup, you must run a
wash cycle at least once.
• The initial setup includes language selection, calibration, and a brief tutorial.
• Tap or turn the
Navigation dial to skip to the next screen.
Run Calibration
• Initial setup includes the calibration process which comes after the language selection. You must
proceed calibration before using the washing machine.
• Empty the drum, and then tap and hold to start calibration.
• When calibration is complete, power turns off and then turns on automatically.
• If you want to proceed calibration again, tap and hold for 3 seconds to enter the system function and
select Calibration .
01 Language selection 02 Calibration 03 Welcome screen
Turn dial & Tap O
English
㑷։ѣᮽ
Empty drum before calibrating
[Tap O to skip]
Welcome!
04 Tutorial
Let’s explore your new washer!
[Tap O to skip]
Turn the dial to explore cycles
[Tap O to skip]
Now hold to start a cycle
[Tap O to skip]
Tap to see
additional functions
[Tap O to skip]
Try saving favourites
in My Cycles
A washer that knows you!
All Done!
U-PJT_COMBO-MD_SimpleUX_DC68-04269L-00_EN.indd 29 2021/6/30 9:07:05