034
Flash ( ) / Left button
When the menu is displayed on the LCD monitor, pressing the
Left
button makes the cursor shift to the left tab.
When the menu is not displayed on the LCD monitor, the
Flash
( )/
Left
button operates as the
Flash
( ) button.
Selecting the
Á
ash mode
1.
Select a desired Recording mode, except the [Movie] mode and the
[DUAL IS] mode. (p.20)
2.
Press the
Flash
button until the desired
À
ash mode indicator is
displayed on the LCD monitor.
3.
A
À
ash mode indicator will be displayed on the LCD monitor. Use the
correct
À
ash to suit the environment.
Flash range
(Unit:
m)
WIDE
TELE
ISO
Normal
0.5 ~ 4.7
2.0 ~ 2.7
AUTO
Macro
0.3 ~ 0.5
1.0 ~ 2.0
Manual focus
0.3 ~ 4.7
1.0 ~ 2.7
Auto macro
0.3 ~ 4.7
1.0 ~ 2.7
z
If you press the
Shutter
button after selecting the
À
ash, the
¿
rst
À
ash
¿
res to check the shooting condition (Flash range and
Power ratio of
À
ash). Do not move the camera until the second
À
ash
¿
res.
z
Using the
À
ash frequently will reduce the life of the battery.
z
Under normal operating conditions the re-charging time for
the
À
ash is usually within 5 seconds. If the battery is weak, the
charging time will be longer.
z
In the [DUAL IS] mode, [Landscape], [Text], [Close up], [Sunset],
[Dawn], [Firework], [Self-Shot], [Food], [Café] scene modes and
the Movie clip mode, the
À
ash function will not operate.
z
Take photographs within the
À
ash range.
z
The image quality is not guaranteed if the subject is too close or
highly re
À
ective.
z
When taking an image in poorly lit conditions with the
À
ash,
there may be a white speck in the captured image. The speck is
caused by the
À
ash light re
À
ecting off atmospheric dust.
