Samsung WB25H7 Series, User Manual

Page: 8 / 72

English - 8
Installation requirements
Water Supply
• The washing machine fills up with a water pressure of 0.05 Mpa ~ 0.78 Mpa (0.5~8.0 kg•f/
cm
2
).
• A water pressure level of less than 0.05 MPa (0.5 kg•f/cm
2
) may inhibit the water valve to close
completely. Or it may take longer than normal to fill the washing machine, causing the washing
machine to turn off. (The washing machine has a fill-time limit that is designed to prevent an
overflow against a loose internal hose)
• For the provided water hoses to reach the washing machine, make sure the water taps are
within 120 cm (4 ft) of the back of the washing machine.
• Before using for the first time, check all connections at the water valves and taps for any leaks.
To reduce a risk of water leaks:
• Make sure the water taps are easily accessible.
• Turn off the water taps when the washing machine is not in use.
• Check for any water leaks at the water inlet hose fittings.
Power supply
• To prevent a risk of fire, electrical shock, or physical injury, all wiring and grounding must be
performed in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest Revision
and local codes and ordinances. It is the owner's responsibility to accommodate adequate
electrical power for this product.
• Do not use an extension cord.
• Use only the power cord that comes with your washing machine.
• When preparing for installation, ensure that your power supply offers:
• A fuse or circuit breaker
• An individual branch circuit serving only your washing machine
• The washing machine must be properly grounded. Against a malfunction or breakdown of
the machine, a proper grounding will reduce the risk of electric shock by providing minimum
resistance to the electric current.
• The washing machine comes with a power cord that has a three-prong grounding plug for use
in a properly installed and grounded socket.
• Do not connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.
• Improper connection of the grounding conductor may cause electric shock. Check with a
qualified electrician or service person if the washing machine is properly grounded.
• Do not modify the plug that comes with the washing machine. If it does not fit the socket, have
a proper socket installed by a qualified electrician.
Untitled-6 8 2014-11-26 5:02:05