background image

2

SAFETY INSTRUCTIONS

Please note that the following precautions for safety intend to prevent unpredictable danger and damage by 

helping the proper use in safety.
When using hot water in washing, please make sure that the water should not exceed 50˚C.

• 

Plastic parts may be deformed or damaged, and an electric shock or a fire may take place.

WARNING 

There might be serious injury or fatal accident when 

you violate this instruction.

•  If the plug (power supply cord) is damaged, it must 

be replaced by the manufacturer or its service 

agent or a similarly qualified person in order to 

avoid a hazard.

•  Do not pull the cord off or touch it with moist 

hands. 

  - An electric shock or a fire may take place.
•  Do not bend the power supply cord by force or 

press it with heavy things.

  - An electric shock or a fire may take place.
•  Do not install the washer nearby electric imple-

ment or don’t put a candle light or cigarette light 

on the washer.

  - A fire may take place.
•  During operation, do not put your hands or metal 

materials under the washer.

  -  You may be hurt by spinning board beneath the 

washer.

•  Stay away from the washer when the bottom of 

the washer sinks into the water.

  -  There might be an electric shock.  Please wait 

until the water drains out completely.

•  Do not put laundry stained with gasoline, benzene, 

or alcohol in the washer, and keep the materials 

away from the washer.

  - An explosion or a fire may take place.
•  During spinning, don’t put your hand in the spin-

ning tub.

  -  

It may hurt your hands. If it does not stop within 

15 seconds after you open the lid, call service 

agent immediately.

•  This appliance is not intended for use by young 

children or infirm persons unless they have been 

adequately supervised by a responsible person 

to ensure that they can use the appliance safely. 

Young children should be supervised to ensure 

that they do not play with the appliance.

•  This appliance has to be connected to the plug 

endurable to proper power consumption.

•  This appliance has to be positioned so that the 

plug is accessible after installation.

•  No user-serviceable parts inside.  Refer any ser-

vicing to qualified service personnel.

  -  Otherwise this may cause a mechanical error, 

electric shock, fire or physical damage.

  -  The product warranty does not cover problems 

resulting from disassembling the product.

• Do not use this product for business purposes.

CAUTIONS

There might be a slight injury or damage when you

violate this instruction.

 

•  Don’t install it in the area with moisture or outdoor 

where it has rain or snow

  - 

An electric shock or a fire may take place. 

•  Please unplug the power supply cord when you do 

not use it.

  - 

An electric shock or a fire may take place.

•  If there is dust or water on the power supply plug 

and its connected part, please remove it complete-

ly.

  - 

An electric shock or a fire may take place.

•  Do not make your kids look into the inside of the 

washer.

  -  

If your kid falls into the washer, his life could be 

in danger.

•  Ventilate immediately without touching the power 

plug if gas is leaking.

  -  

An electric shock or a fire may take place if it 

catches flame.

•  If the washer makes strange noise, smell or 

smoke, unplug it promptly and call service agent.

  - An electric shock or a fire may take place.

•  When cleaning, don’t spray water to the parts of 

the washer directly.

  - It may make it’s life span shorten. 

    Also an electric shock or fire may take place

•  Don’t use several appliances together with an out-

let.

  - A fire may take place due to unusual heat.

• Don’t press the button with an awl or pin.

  - An electric shock or a fire may take place.

•  Use the new hose-sets and old hose-sets should 

not be reused.

•  If the damage is found on the current cord in use, 

it should be replaced by manufacturer, service 

cener or authorized person in order to avoid the 

risk.

•  Connect the grounding wire to the shell plate, and 

bury it under at least 25cm of earth:elternatively, 

connect the ground wire to the appropriate pin 

on a properly grounded power receptacle.  Never 

connect the wire to a telephone line, lightning rod, 

or gas pipe. 

WA90J7G1-02205A-0719.indd   3

2005-07-20   ¿ÀÈÄ 6:08:06

Summary of Contents for WA90J7













Reviews: