Samsung WA85R6350B Series User Manual Download Page 28

Page: 28 / 48

28 English

Oper

ations

Operations

Control panel

Cycle Panel

Press the button repeatedly to select a desired cycle listed above each
button. For more information, see the Cycle overview section on page

•

Cycle 1:

COTTON

SUPER CLEAN

WATER SAVING

COLORS / DARKS

•

Cycle 2:

DELICATES

BABY CARE

TOWELS

BEDDING

•

Cycle 3:

QUICK WASH

RINSE + SPIN

SPIN

TUB CLEAN

Display

Displays the current cycle information and estimated time remaining,
or an information code if the washing machine needs to be checked.

Water Level

Press to change the water level manually.

Wash Time

Press to adjust the wash time between 3 to 30 minutes.

Rinse Times

Press to change the number of rinses (maximum 5 rinses).

Spin Time

Press to select a different spin time.

Delay End

Press to finish the wash at a specified time. To cancel the Delay End
settings, simply turn off the washing machine. You can set the Delay
End time up to 24 hours.

Intensive
Wash

Press this button when the laundry is heavily soiled and needs to be
washed intensively.
The cycle time will be increased if Intensive Wash is on.

Alarm Off

You can turn the sound on or off for all cycles. When the sound is off,

turns on.

Temp.

Press to toggle between two different water temperature options.

• Cold

: For brightly colored, very lightly soiled items.

• Hot

: For colorfast items.

POWER

Press to turn on/off the washing machine.

WA6000R_DC68-04120D-01_EN.indd 28

2021-12-09 2:23:16

Summary of Contents for WA85R6350B Series

















































Search results

Summary of Contents for WA85R6350B Series

Reviews:

Brands by name

Popular brands

Samsung WA85R6350B Series, User Manual

Search results

Summary of Contents for WA85R6350B Series

Reviews:

Brands by name

Popular brands