HOW TO WASH AUTOMATICALLY
DEPENDS ON THE LAUNDRY?
BEFORE STARTING WASHING, CHECK THE FOLLOWING;
Turn on the faucet to open.
• Check if the water supply hoses are correctly
connected to cold and hot water.
Plug the power cord in.
• Use for 220V only.
Make sure to lay down the drain hose.
(In case no drain pump)
SPECIAL NOTES!
Automatic Sensing Function
• At every course (except, wool course) the amount of laundry is automatically
sensed and then appropriate water level, washing time, rinsing cycle, and
spinning time are automatically selected for automatic washing.
• After the power is on, a course is selected and Start/Hold button is pressed.
Then, the washing board starts spinning without water. This action senses
how much laundry is in the washing basket, not a machine problem. After
this sensing process, water supplies automatically.
Soak Wash
• Select the SOCK button.
• Add 30 minutes of soaking to the selected course.
Adding Detergent and Softener
• It senses the amount of laundry and indicates the water level and amount of
detergent. Then, it starts water supply right away.
• During the water supply, it is possible to open the detergent box and add
detergent. However, it is better to press Start/Hold button to stop water
supply and add detergent. Close the lid and press Start/Hold button again.
This way is much more convenient.
• If the softener is inserted in the softener dispenser, it automatically adds in
at the last rinsing cycle.
HOW TO SELEC FUZZY COURSE?
Selects the best washing course automatically.
1. Add the laundry in and press the
button.
2. Press the
button.
Water level is selected automatically.
Washing,rinsing, and spinning follow.
If you want to pause, press the START/HOLD button again.You can change the course
when paused.
3. Close the lid.
• If the lid is open while running, the washing machine is stopped
automatically for safety. (Except, water supply continues while
the lid is open.)
• When hot water is selected, both cold and hot water are supplied
for the first 20 seconds in order to protect the clothes.
HOW TO SELECT BLANKET COURSE?
Blue jeans, thick clothes, or dirty laundry
1. Add the laundry in and press the
button.
2. Press the course button.
• Select Blanket course.
3. Press the
button.
Add detergent and softener in proportion to the water level. Then, close the lid.
HOW TO SELECT SPEEDY COURSE?
If you want to wash those frequently used towels or less dirty laundry in a short period of
time.
1. Add the laundry in and press the
button.
2. Press the course button.
• Select Speedy course.
3. Press the
button.
Add detergent and softener in proportion to the water level. Then, close the lid.
- 7 -
WM-01400-inne-colour 2/14/02 11:32 AM Page 7