background image

2

SAFETY INSTRUCTIONS

●   

Where an unearthed power cord is not fitted, 

be sure that the washer is grounded.

To avoid electrical shock use metal piping for the ground

connection. 

Take care not to ground the washer to gas pipes or   

telephone cables due to the danger of explosion from

lightning strikes.

●   

During spinning, don't put your 

hand in the spin basket.

Because the spin basket is rotating 

at the high speed, rotating parts 

may injure your hand.

● 

Openings must not be obstructed 

by carpeting when the washing machine is 
installed on a carpeted floor.

● 

Turn off water taps when the washer is not in 

use to avoid water pressure damage to the 
pump.

●   

To minimize the possibility of electric shock, 

unplug this appliance from the power supply  
or disconnect the washer at the household 
distribution panel by removing the fuse or 
switching off the circuit breaker before 
attempting any maintenance or cleaning.

●   

The appliance is not intended for use by young 

children or infirm persons without supervision. 

●   

Young children should be supervised to ensure  

that they do not play with the appliance.

●   

If the power supply cord is damaged,

it must be replaced by the manufacturer 
or its service agent or a similary qualified 
person in order to avoid a hazard.

●   

Place clothes evenly into the washer 

as unevenly distributed laundry may cause  
excessive out-of-balance noise and vibration.

●   

Don't use excessively hot water. 

(50˚C or more)

Plastic parts may be deformed or damaged. 
Also, clothing may be deformed or bleached.

●   

Before washing, check all pockets.

If nails or pins remain in pockets, they may 
damage the washer or clothes.

●   

Don’t press the control panel with a 

sharp object.

Panel damaged or malfunction may occur.

If the control panel for this
washer is damaged, it must be 
replaced by a repair shop appointed 
by the manufacturer, as special 
purpose tools are required.

● 

Do not operate this appliance 

if it is damaged, malfunctioning, 
partially disassembled, or has 
missing or broken parts, including 
a damaged cord or plug.

●   

Do not store or use gasoline 

or other flammable vapors 
and liquids in the vicinity of this 
or any other appliance.

●   

The instructions for use shall specify the 

maximum mass or dry cloth in kg, for which 
the appliance is designed. 

●   

If the appliance is supplied from a cord

extension set or electrical portable outlet 
device the cord extension set or electrical 
portable outlet device should be positioned 
so it is not subject to splashing or ingress
of moisture.

WARNING!

To reduce the risk of fire, electric shock, or injury to persons when using your appliance,
take care to adhere to the following precautions.

WA7010 DC68-00701A  10/24/01 9:27 AM  Page 3

Summary of Contents for WA7000A1











Reviews: