Samsung WA5451AN Series, User Manual

Page: 29 / 132

troubleshooting _29
troubleshooting
CHECK THESE SOLUTIONS IF YOUR WASHER…
PROBLEM SOLUTION
Will not start. • Make sure the door is closed.
• Make sure your Washer is plugged in.
• Make sure the water source faucets are open.
• Make sure to press the Start/Pause Button to start your Washer.
• Make sure Child Lock is not activated. See page 21.
• Before your Washer starts to fi ll, it will make a series of clicking noises
to check the door lock and do a quick drain.
• Check the fuse or reset the circuit breaker
Has no water or not enough
water.. • Turn both faucets on fully.
• Straighten the water inlet hoses.
• Disconnect hoses and clean the screens. Hose fi lter screens may be
clogged.
• Open and close the door, then press the Start/Pause Button.
Has detergent remaining
in the automatic dispenser
after the wash cycle is
complete.
• Make sure your Washer is running with suffi cient water pressure.
Vibrates or is too noisy. • Make sure your Washer is set on a level surface. If the surface is not
level, adjust your Washer feet to level the appliance.
• Make sure that the shipping bolts are removed.
• Make sure your Washer is not touching any other object.
• Make sure the laundry load is balanced.
Stops • Plug the power cord into a live electrical outlet.
• Check the fuse or reset the circuit breaker.
• Close the door and press the Start/Pause Button to start your
Washer.
For your safety, your Washer will not spin unless the door is closed.
• Before your Washer starts to fi ll, it will make a series of clicking noises
to check the door lock and do a quick drain.
• There may be a pause or soak period in the cycle. Wait and it may
start.
• Check the screens on the inlet hoses at the faucets for obstructions.
Clean the screens periodically.
05 tr
oubleshooting
WA5471ABP-03050A-02_EN_v3.indd Sec8:29 WA5471ABP-03050A-02_EN_v3.indd Sec8:29 2011-08-23 6:54:07 2011-08-23 6:54:07