English
52
Troubleshooting
Checkpoints
If you encounter a problem with the washer, first check the table below and try the
suggestions.
Problem
Action
Does not turn on.
•
Make sure your home electrical system is providing
electrical power that matches the requirements of the
washer. See page
19
.
•
Make sure the power cord is completely plugged in.
•
Check the fuse or reset the circuit breaker.
•
If you have turned the power off to drain the water added
by the Active Waterjet function, power does not turn on
until the water is completely drained.
Does not start.
•
Make sure the door is closed.
•
Make sure the water taps are open.
•
Make sure to press or tap
Start/Pause (Hold to Start)
to
start the washing machine.
•
Make sure Child Lock is not activated.
•
Before the washing machine starts to fill, it will make a
series of clicking noises to check the door lock, and then
does a quick drain.
•
Was the door opened during the spinning cycle? Close the
door, and then press or tap
Start/Pause (Hold to Start)
to
resume.
•
The machine has entered Standby, has paused, or is in a
soaking cycle. Please wait.
•
Check the fuse or reset the circuit breaker.
Troubleshooting
Untitled-3 52
Untitled-3 52
2021-10-25 6:39:28
2021-10-25 6:39:28
