English -
31
troubleshooting
CHECK THESE SOLUTIONS IF YOUR WASHER…
PROBLEM
SOLUTION
Will not start.
•
Make sure the lid is closed.
•
Make sure your washer is plugged in.
•
Make sure the water source faucets are open.
•
Make sure to press the Start/Pause button to start your Washer.
•
Make sure Child Lock is not activated. See page 20.
•
Before your washer starts to fi ll, it will make a series of clicking noises
to check the lid lock and do a quick drain.
•
Check the fuse or reset the circuit breaker
Has no water or not enough
water.
•
Turn both faucets on fully.
•
Straighten the water inlet hoses.
•
Disconnect hoses and clean the screens. Hose fi lter screens may be
clogged.
Has detergent remaining
in the automatic dispenser
after the wash cycle is
complete.
•
Make sure your washer is running with suffi
cient water pressure.
Vibrates or is too noisy.
•
Make sure your washer is set on a level surface. If the surface is not
level, adjust your washer’s feet to level the appliance.
•
Make sure your washer is not touching any other object.
•
Make sure the laundry load is balanced.
Stops
•
Plug the power cord into a live electrical outlet.
•
Check the fuse or reset the circuit breaker.
•
Close the lid and press the Start/Pause button to start your washer.
For your safety, your washer will not spin unless the lid is closed.
•
Before your washer starts to fi ll, it will make a series of clicking noises
to check the lid lock and do a quick drain.
•
There may be a pause or soak period in the cycle. Wait and it may
start.
•
Check the screens on the inlet hoses at the faucets for obstructions.
Clean the screens periodically.
05 tr
oubleshooting
WA7000M_EN.indd 31
WA7000M_EN.indd 31
2/3/2017 11:13:28 AM
2/3/2017 11:13:28 AM
