18 _ Troubleshooting
4. TROUBLESHOOTING
4-1. TEST MODE
No
mode
How to enter
1
Smart Install
Standby
Set the scheduled
time to 17:00
Press Start/Pause
for 7 seconds
Smart Install
2
Automatic check mode
Smart Install
Press Start/Pause While displaying “AS”
3
Manual check mode
Enter Smart Install
Press Delay End While displaying “AS” delay end, Check devices in
turn when pressing delay end.
4
S/W version Check
Enter Smart Install
Press the first button on the bottom While displaying “AS”
5
Diagnostic Code Check
Enter Smart Install
Press the first button on the right at the bottom While displaying
“AS”, “Cr”. Tum jog dial along the direction of CW when displaying.
Automatic Mode of Smart Install
• Automatically start all operation modes of Smart Install.
Manual Mode of Smart Install
• Under the condition of manual mode, every time when “Delay End” is pressed, next step will be entered.
• Contents like washings, etc. are not allowed in the drum.
Operation
mode
Description
Operation
mode
Description
1
carry out test for machine door locking
7
carry out test for operation of drainage pump
2
carry out test for drainage pump operation
8
carry out test for operation of dehydration
3
carry out test for operation of preparatory valve
9
carry out test for operation of drying heater and drying fan
Co
carry out test for operation of cold water valve
10
carry out test for operation of machine door
Ho
carry out test for operation of hot water valve
OK(Ot)
Automatic mode of Smart Install is completed normally
6
carry out test for operation of water shot valve
carry out test for operation of washing heater
carry out test for operation of rinsing
* Accessories not included in the product are not required to check and they can be skipped directly.
Identity of Smart Install completion
• After Smart Install is completed normally,
「
OK(Ot)
」
a identity will display.
• If Smart Install is completed abnormally or Smart Install fails to work,
「
nG
」
identity will display.
Result Enquiry of Automatic Mode of Smart Install
• Under the condition of appearance of ‘AS’ identity, press “Delay End + Start/Pause” button.
• If automatic mode result is in normal condition,
「
OK(Ot)
」
identity will display. If automatic checking mode
fails to complete normally or fails to execute,
「
nG
」
identity will appear.
Diagnosis Information Display Mode
• Under the condition of appearance of
「
AS
」
identity, if the first button on the right at the bottom is pressed,
「
CR
」
identity
will appear and diagnosis information display mode is entered.
• Under the condition of appearance of
「
CR
」
identity , if turn the jog dial control switch clockwise,
diagnosis codes generated before will display 7 digits at most.
