English -
30
troubleshooting
cHeck tHese solutions if your WAsHer…
problem
soluTion
Will not start.
•
Make sure the lid is closed.
•
Make sure your washer is plugged in.
•
Make sure the water source faucets are open.
•
Make sure to press the Start/Pause button to start your Washer.
•
Make sure Child Lock is not activated. See page 20.
•
Before your washer starts to fill, it will make a series of clicking noises
to check the lid lock and do a quick drain.
•
Check the fuse or reset the circuit breaker
Has no water or not enough
water.
•
Turn both faucets on fully.
•
Straighten the water inlet hoses.
•
Disconnect hoses and clean the screens. Hose filter screens may be
clogged.
Has detergent remaining
in the automatic dispenser
after the wash cycle is
complete.
•
Make sure your washer is running with sufficient water pressure.
vibrates or is too noisy.
•
Make sure your washer is set on a level surface. If the surface is not
level, adjust your washer’s feet to level the appliance.
•
Make sure your washer is not touching any other object.
•
Make sure the laundry load is balanced.
stops
•
Plug the power cord into a live electrical outlet.
•
Check the fuse or reset the circuit breaker.
•
Close the lid and press the Start/Pause button to start your washer.
For your safety, your washer will not spin unless the lid is closed.
•
Before your washer starts to fill, it will make a series of clicking noises
to check the lid lock and do a quick drain.
•
There may be a pause or soak period in the cycle. Wait and it may
start.
•
Check the screens on the inlet hoses at the faucets for obstructions.
Clean the screens periodically.
WA7000HA WASH_WA48H_USER MANUAL_DC68-03133P-01_EN.indd 30
2014-1-10 15:41:54
