Samsung WA40J3000A Series, User Manual

Page: 27 / 120

English - 27
problem soluTion
does not drain and/or spin.
• Check the fuse or reset the circuit breaker.
• Straighten the drain hoses. Eliminate kinked hoses. If there is a drain
restriction, call for service.
• Close the lid and press the Start/Pause button. For your safety, your
washer will not spin unless the lid is closed.
load is too wet at the end
of the cycle.
• Use the High spin speed.
• Use high efficiency detergent to reduce over–sudsing.
•
The Load is too small. Very small loads (one or two items) may
become unbalanced and not spin out completely.
leaks water. • Make sure all hose connections are tight.
•
Make sure the end of the drain hose is correctly inserted and secured
to the drainage system.
• Avoid overloading.
• Use high efficiency detergent to prevent over–sudsing.
has excessive suds. • Use high efficiency (HE) detergent to prevent over-sudsing.
• Reduce the detergent amount for soft water and small or lightly soiled
loads.
• Do not use a Non-HE detergent.
has an odor. • Make sure you are using HE detergent. Excessive suds collect in
nooks and crannies and cause mold.
• Run cleansing cycles to sanitize the machine periodically. (Silver Care,
Sanitize, or Self-Clean depending on the model)
• Dry the interior of your washer after the total cycle has finished.
05 tr
oubleshooting
WA3000J_WA40J3000AW_USER MANUAL_DC68-03520A-08.indd 27 2015/12/22 13:45:14