![Samsung WA40A3 A Series User Manual Download Page 50](http://html.mh-extra.com/html/samsung/wa40a3-a-series/wa40a3-a-series_user-manual_1197394050.webp)
50 English
T
roubleshoo
ting
Troubleshooting
No
Code
Meaning
6
High LED
Flashes
Your Washer has tried to fill but has not reached the proper
water level.
NOTE
When the High LED is flashing, the washer drains for 3 minutes.
During this time, the
POWER
button is inoperative.
•
If the information code remains, contact a customer service
center.
7
Mid LED
Flashes
A fault is detected in the water level sensor.
If the information code remains, contact a customer service
center.
8
Low LED
Flashes
Your washer is not draining. It can also mean that the unit
senses a small clog while draining.
•
Do the following:
1.
Turn off the unit and turn it on again.
2.
Select only the Spin Only.
3.
Press the
START/PAUSE
to drain the water. If it still does not
drain, contact a customer service center.
9
Hot & Warm
LEDs flash
Unbalanced load prevented your Washer from spinning.
•
Redistribute the load, and then press the
START/PAUSE
button.
10
Hot & Cool
LEDs flash
Motor not running properly.
•
Restart the cycle by presssing the
START/PAUSE
button.
•
If the information code remains, contact a customer service
center.
11
Hot & Cool
LEDs flash
Mems sensor is not working properly.
•
If the information code remains, contact a customer service
center.
12
Hot & Extra
High LEDs
flash
Door lock is not working properly.
•
Close the lid tightly and restart the cycle.
•
If the information code remains, contact a customer service
center.
WA3000A_DC68-03850F-00_EN.indd 50
WA3000A_DC68-03850F-00_EN.indd 50
2020-12-07 4:21:06
2020-12-07 4:21:06