English 35
Tr
ouble
shoo
ting
Flashing indicators
If the washing machine fails to operate, you may see an indicator flash. Check the table
below and try the suggestions.
Flashing Indicator
Symptom
Solution
Hot
The door is open while the
machine is operating.
Close the door properly
and restart the cycle. If the
indicator continues to flash, call
for service.
Warm
Communication error between
sub PBA and main PBA
Call for service.
Eco Warm
A button is not activated
properly.
Call for service.
Cool
The water level sensor fails.
If this happens, the machine
drains water for 3 minutes.
During this process, the Power
button is disabled.
Call for service.
Extra High
The machine tries to fill the
tub with water but fails. If this
happens, the machine drains
water for 3 minutes. During
this process, the Power button
is disabled.
•
Make sure the water taps
are open at all times.
•
Make sure no hose is
kinked.
•
If you use a flood safety
device, remove the device
and connect the water
hoses directly to the
machine.
The hot water hose is not
connected.
Connect the hot water hose to
the machine properly. This is
important because hot water
is controlled by the ATC (Auto
Temperature Control).
WA3100M_DC68-03823G-00_EN.indd 35
2017-11-17 4:35:39