background image

- 3 -

SAFETY INSTRUCTIONS

Please note that the following precautions for safety intend to prevent 
unpredictable danger and damage by helping the proper use in safety.

When using hot water in washing, please make sure that the water should not 
exceed 50

°

C.

Plastic parts may be deformed or damaged, and an electric shock or a fire 
may take place.

WARNING

There might be serious injury or fatal accident when you violate this 
instruction.
If the power supply cord or plug is damaged or loosened, do not use.

An electric shock or a fire may take place.

Do not pull the cord off or touch it with moist hands.

An electric shock or a fire may take place.

Do not bend the power supply cord by force or press it with heavy things.

An electric shock or a fire may take place.

Do not install the washer nearby electric implement or don’t put a candle 
light or cigarette light on the washer.

A fire may take place.

Do not disassemble, repair or remodel it recklessly.

When you need to repair it, please call service agent. An electric shock or a 
fire may take place.

During operation, do not put your hands or metal materials under the 
washer.

You may be hurt by spinning board beneath the washer.

Stay away from the washer when the bottom of the washer sinks into the 
water.

There might be an electric shock. Please wait until the water drains out 
completely.

Do not put laundry stained with gasoline, benzene, or alcohol in the 
washer, and keep the materials away from the washer.

An explosion or a fire may take place.

During spinning, don’t put your hand in the spinning tub.

It may hurt your hands. If it does not stop within 15 seconds after you open 
the lid, call service agent immediately.

CAUTIONS

There might be a slight injury or damage when you violate this 
instruction.

Don’t install it in the area with moisture or outdoor where it has rain or 
snow.

An electric shock or a fire may take place.

Please unplug the power supply cord when you do not use it.

An electric shock or a fire may take place.

If there is dust or water on the power supply plug and its connected part, 
please remove it completely.

An electric shock or a fire may take place.

Do not make your kids look into the inside of the washer.

If your kid falls into the washer, his life could be in danger.

Ventilate immediately without touching the power plug if gas is leaking.

An electric shock or a fire may take place if it catches flame.

If the washer makes strange noise, smell or smoke, unplug it promptly 
and call service agent.

An electric shock or a fire may take place.

When cleaning, don’t spray water to the parts of the washer directly.

It may make it’s life span shorten.
Also an electric shock or fire may take place. 

Don’t use several appliances together with an outlet.

A fire may take place due to unusual heat.

Don’t press the button with an awl or pin.

An electric shock or a fire may take place.

Use the new hose-sets and old hose-sets should not be reused.

If the damage is found on the current cord in use, it should be replaced 
by manufacturer, service center or authorized person in order to advoid 
the risk.

Connect the grounding wire to the shell plate, and bury it under at least 
25cm of earth:elternatively, connect the ground wire to the appropriate 
pin on a properly grounded power receptacle. Never connect the wire to a 
telephone line, lightning rod, or gas pipe.

g

y,

,

Summary of Contents for WA13R3















Reviews: