Samsung WA13M8700 Series User Manual Download

Page: 44 / 48

44 English

ouble

shoo

ting

Troubleshooting

Information codes

If the washing machine fails to operate, you may see an information code on the display.
Check the table below and try the suggestions.

Code

Action

The WaterLevel sensor is not working properly.

•

Check WaterLevel Sensor wire harness.

•

If the information code remains, contact a customer service
center.

NOTE

When the washing machine displays “

”, the washing machine

drains for 3 minutes and the

POWER

button is inoperative during

this time.

Check the motor for operation.

•

Try restarting the cycle.

•

If the problem continues, call for service.

Water is not supplied.

•

Make sure the water taps are open.

•

Make sure the water hoses are not clogged.

•

Make sure the water taps are not frozen.

•

Make sure the washing machine is operating with sufficient
water pressure.

•

Make sure that the cold water tap and the hot water tap are
properly connected.

•

Clean the mesh filter as it may be clogged.

NOTE

When the washing machine displays “

”, the washing machine

drains for 3 minutes and the

POWER

button is inoperative during

this time.

4C2

•

Make sure the cold water supply hose is firmly connected to
the cold water tap. If it is connected to the hot water tap, the
laundry may be deformed with some cycles.

WA8700K(HEATER)_DC68-03520W-02_EN.indd 44

2018-05-15 5:43:39

Summary of Contents for WA13M8700 Series

















































Search results

Summary of Contents for WA13M8700 Series

Reviews:

Related manuals for WA13M8700 Series

Brands by name

Popular brands

Samsung WA13M8700 Series, User Manual

Search results

Summary of Contents for WA13M8700 Series

Reviews:

Related manuals for WA13M8700 Series

Brands by name

Popular brands