5
WASHING PROCEDURE
Before starting washing, check the following;
Connect the water supply hose to the water tap. Leave a tap
open. Plug the power cord in. Make sure to lay down the
drain hose. (In case no drain pump)
Put the laundry into the washer and add detergent, too.
Be careful not to overload. Use right detergent
for the fabrics you are washing.
FUZZY COURSE
Selects the best washing course
automatically.
1. Press the POWER Button to"ON".
2. Press the START/PAUSE button.
Water level is selected automatically.
Washing,rinsing, and spinning follow.
If you want to pause, press the START/PAUSE
button again.You can change the course when paused.
3. Close the lid.
HEAVY DUTY COURSE
1. Press the power button to "ON".
2. Press the course select button once.
3. Press the START/PAUSE button
Water level is selected automatically.
Washing, rinsing, and spinning follow.
If you want to pause, press the START/PAUSE
button again.You can change the course when paused.
4. Close the lid.
DELICATE COURSE
1.Press the power button to "ON".
2.Press the course select two times.
3.Press the START/PAUSE button.
Washing,rinsing, and spinning follow.
If you want to pause, press the START/PAUSE
button again.You can change the course when paused.
4. Close the lid.
DELAY START COURSE
Select this course when you have to go out or do
something else.
1. Press the power button to "ON".
2. Press the DELAY START button once.
You may change the delay start time with
use the DEALY START button.
(from 3 hours to 18 hours)
3. Press the START/PAUSE button and put
the proper amount of detergent into tub.
4. Close the lid.
The washing finishes by the time you reserved.
POWER
COURSE
COURSE
START/
PAUSE
POWER
START/
PAUSE
DELAY
START
POWER
COURSE
START/
PAUSE
POWER
START/
PAUSE
8KGb-01124K 2003.3.28 5:38 PM Page 6
