6
CLEAN TUB COURSE
(In case you want to clean the tub)
1. Press
POWER
button.
2. Select
CLEAN TUB
course by pressing COURSE
button.
3. Press
START/HOLD
button.
Add the detergent/rinse in proportion to the water
level and then close the lid.
●
Soak washing function is adopted.
●
WATER SUPPLY button only is controllable.
●
Remove the dirt on the outer wall of the washing
tub with a form of powerful stream of water.
SOAK COURSE
(In case you want to perform soak washing for heavily
soiled laundry)
1. Put the laundry into the washer and press
POWER
button.
2. Select a course you want by pressing
COURSE
button.
●
Select hot or cold water by pressing WATER
SUPPLY button.
3. Press
SOAK
button.
●
You can't select SOAK function during the
WATER stage.
4. Press
START/HOLD
button.
Add the detergent/rinse in proportion to the water
level and then close the lid.
●
In this course, your machine repeats 1-minute
operations and 4-minute pauses (soaking) until
the start of washing.
DELAY START
1. Put the laundry into the washer and press
POWER
button.
●
Make sure to leave the taps open.
2. Press
DELAY START
button.
1) You can select from 3 hours, up to maximum of
19 hours in increment of one hour.
2) At the end of the selected time, your machine will
have finished washing.
●
You can choose a course as you wish.
3. Press
START/HOLD
button.
●
Add the detergent/rinse in proportion to the water
level and then close the lid.
●
Make sure to add the detergent into the liquid
soap device.
●
If the detergent is added directly onto the laundry,
it may cause discoloration as the delay gets
longer.
●
Press POWER button in order to cancel this
function.
●
The delay could be finished at slightly different
time according to the water pressure.
POWER
COURSE
START/
HOLD
POWER
SOAK
START/
HOLD
POWER
DELAY
START
START/
HOLD
01174A-WA1265B0-gb 1904/1/11 6:38 AM Page 7
