English -
29
tub cleAn
Tub Clean is a self-cleaning cycle that removes mold that may
occur inside the washing machine.
1.
Press the
power
button.
2.
Select the
Tub clean
cycle.
•
Once the Tub Clean cycle is selected, the only
function that can be set is Delay End.
3.
Press the
start/pause
button.
•
If you press the
start/pause
button, Tub Clean
begins.
•
Using Tub Clean, you can clean the tub without using a cleansing agent.
•
Never use Tub Clean when laundry is in the washing machine. This may cause damage to
the laundry or a problem with the washing machine.
the tub clean Auto indicator function
•
If the “
tub clean
” is lit after a wash, it indicates that tub (drum) cleaning is required. In this
case, remove the laundry from the washing machine, turn the power on, and clean the tub
by running Tub Clean.
•
If you do not run Tub Clean, the “
tub clean
” indicator
turns off. However, the “
tub clean
” indicator will light
again after two washes. Not running Tub Clean at
this point will not cause a problem with the washing
machine.
•
Although the Tub Clean Auto Indicator appears once a
month or so, the frequency may differ depending on the
number of times the washing machine is used.
04 maintaining your washer
cAution
WA7000HG_WA10H_USER MANUAL_DC68-03133X_EN.indd 29
2014/8/12 11:43:02
