Samsung VRR P10, Product Manual

Page: 17 / 50

17
/
50
7.1.2 Screen connection file loading
Click "Load from File" in the "Screen connection" interface of the software parameter
settings. Load the “*.scr” file, then click the “Send to HW” button. After the display
shows normal, click “Save”, as shown in Picture 7-6, Picture 7-7.
Picture 7-6
Picture 7-7
Note: Do not modify any parameters after non-professionals load the "*.scr" file. If the
parameters are inadvertently modified, the display screen is not displayed properly.
The screen file needs to be reloaded and sent to the receiving card.
At this point, the entire screen connection parameter setting has been completed. At
this time, the entire screen should be displayed on the desktop of the computer. Next,
you can play the program you want in the initial interface of NovaLCT-Mars. For
details, please refer to the software manual. It can be seen in the "Help" submenu
under the software interface "Help".
Pic 7-8