12
13
a. For the first use, please charge for 12 hours;
b. When the battery is low power, please charge it as soon as possible;
c. If you do not use the appliance for an extended period of time, fully charge the battery and
put it in a ventilated and dry place;
d. If the appliance is not used for more than 3 months, charge the appliance for 12 hours.
Caution
b. In case of safety,there’s no backward direction fucntion.
c. Please operate the remote control within 5m to appliance.
Caution
Docking: When in standby or working mode, appliance will return docking station for charging.
1
6
Suction increase: Increasing the suction power.
Auto cleaning: The robot will clean randomly.
7
Suction decrease: Decreasing the suction power.
8
Direction: Controlling the moving direction by forward/left/right key
.
2
.
3
Auto
Power ON/OFF
Introduction of Remote Control
1
Power on
：
Open the cover, power on by
turning the power switch to "
ON
", and
then press the start button, the indicator
lights up .
2
time)
：
the power switch to "
OFF
" and the light
goes out
.
Docking
Start/Pause
Spot cleaning
Suction decrease
Direction
Edge cleaning
Auto cleaning
Suction increase
Spot cleaning: Start to cleaning by Spiral mode in certain zone
.
4
Edge cleaning: Cleaning by the edge of obstacle.
5
(Zigzag Cleaning)
Start/Pause (Zigzag Cleaning): When in standby mode,appliance start working or pause with
zigzag cleaning.
Insert batteries
Open the battery cover by lifting it while pressing the locking tab and insert the batteries as
shown in the illustration. Then close the cover until it clicks into place.