Samsung VPL500, Service Manual

Page: 62 / 147

Samsung Electronics 4-43
Alignment and Adjustment
2-3. Head Switching Point
: This adjustment is performed after the
replacement of deck mechanism.
• Without this adjustment, there will be a noise
in playback picture.
a. Preparations
b. Connect a power source.
c. Get into the VCR adjustment mode.
d. Press the “FADE(MODE UP)” or “BLC(MODE
DOWN)” button of FUNCTION so as to select
the address 03.
e. Insert the Standard Color Bar Tape and press
the “PLAY” button.
Note : If there is no video out, when you pressed
the “PLAY” button, you can not adjust the
Head Switching Point.
It may be caused by maladjusted VIDEO
block.
In this case, adjust the VIDEO block before
the Head Switching Point.
VIDEO block adjustments are 2-3~2-11.
f. The data of Head Switch is set to 7.2H~7.7H
automatically.
g. Be sure to press the “PROGRAM AE(CON-
FIRM)” button on FUNCTION to memorize set-
ting.
h. Reset the power source so as to fix the new data
to the camcorder’s EEPROM.
b. Connect a power source.
c. Get into the VCR adjustment mode.
d. Press the “FADE(MODE UP)” or
“BLC(MODE DOWN)” button of FUNCTION
so as to select the address 01.
e. Press the “TILTLE(DATA DOWN)/ DSE(DATA
UP)” so that OSD shows“ ”ERR:XX EVR: XX”
“XX” is different dependent on the model as
below.
f. Be sure to press the “PROGRAM AE(CON-
FIRM)” button on FUNCTION to memorize set-
ting.
g. Reset the power source so as to fix the new data
to the camcorder’s EEPROM.
2-2. Model Code 1
a. Preparation
b. Connect a power source.
c. Get into the VCR adjustment mode.
d. Press the “FADE(MODE UP)” or
“BLC(MODE DOWN)” button of FUNCTION
so as to select the address 02.
e. Press the “TITLE(DATA DOWN)/ DSE(DATA
UP)” so that OSD shows“ ”ERR:XX EVR: XX”
“XX” is different dependent on the model as
below.
f. Be sure to press the “PROGRAM AE(CON-
FIRM)” button on FUNCTION to memorize set-
ting.
g. Reset the power source so as to fix the new data
to the camcorder’s EEPROM.
TAPE
STANDARD COLOR BAR TAPE
RECORDED WITH SP SPEED
POWER SOURCE
NONE
NONE
03
HD SWP
EQUIPMENT
OTHER
TEST POINT
ADDRESS
NAME
03.HD SW P
EPR : XX EVR : YY
7.5H
Model Name
VP-L500
VP-L520
VP-L530
VP-L530B
VP-L550
Addressed code
02
02
33
33
77
Model Name
SCL500
SCL520
SCL530
SCL550
Addressed code
02
02
73
77
Model Name
VP-L500
VP-L520
VP-L530
VP-L530B
VP-L550
Addressed code
A4
E4
E4
E4
E4
Model Name
SCL500
SCL520
SCL530
SCL550
Addressed code
A2
A4
E4
E4