Alignment and Adjustment
8-
Samsung Electronics
8-1-2 Camera Adjustment
Note: When you replace ASSY-CAMERA or PCB BORAD, you need to adjust each part again, due to
the fact that EEPROM remembers the confirmed adjustment value. Therefore,
re-adjustment is necessary for data-saving when replacing.
- The part that needs re-adjustment after replacing Lens Ass’y or PCB BOARD.
q
Hall
w
Iris
e
Lens 3m
r
Zoom VR Check
t
Auto White Balance (3100K)
y
Auto White Balance (5100K)
1. HALL adjust
q
The camera should be in "E-E" mode (Video Record).
w
Connect the AV cable to Input port of Monitor or TV.
e
After entering the Admin mode, press the OK button in "Camera Adjust" menu.
r
Press the OK button in "HALL" menu.
t
Press the OK button in "YES".
y
"Adjustment completed!" displays after finishing Hall Adjust.
2. IRIS level adjust
q
The camera should be in "E-E" mode (Video Record).
w
Connect the AV cable to Input port of Monitor or TV.
e
After entering the Admin mode, press the OK button in "Camera Adjust" menu.
r
Press the OK button in "IRIS" menu.
t
Press the OK button in "YES" .
y
Adjustment completed!"displays after finishing IRIS Adjust.
