Samsung VP-DX200, User Manual

Page: 132 / 144

122 _ English
Before contacting a Samsung authorised service centre, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
Warning indicators and messages
Overall
Message Icon Informs that... Action
Low Battery The battery pack is almost discharged.
Replace with a charged battery or connect the
AC power adaptor. (If the AC power adaptor is
connected when “ Low Battery ” is displayed, the
power is turned off and the charging starts.)
Cover is opened Cover is opened. Close the cover.
Discs
Message Icon Informs that... Action
Insert Disc There is no disc in DVD camcorder. Insert a disc.
Disc Full There is not enough disc space.
Change to a new disc. Erase the recorded videos
(DVD-RW disc VR mode only).
Finalised Disc The disc is finalised. To record on a DVD-RW disc, unfinalise it.
Not Supported
Disc
The disc is not recognized in the DVD
camcorder. The disc has been finalised
in a camcorder manufactured by
another company.
The supported discs are DVD-R, DVD-R DL, DVD-
RW.
Use a new disc.
Disc Error
File system does not match to the disc.
The disc is used on the computer.
The disc is damaged.
Use a new disc.
Write Error
Your disc has some problems in writing
data.
Disc is shocked while videos are being
recorded onto the disc.
To recover previous data in your disc, turn the power
off and on. After recovering data, the system will be
switched to STBY mode.
If it fails to recover data, “ Disc Error ” appears.
Chapter number is full.
Cannot record
video
If you set the storage media to DVD, up
to 250 videos (chapters) can be created
on DVD-R/-R DL/-RW.
Change to a new disc. Erase the recorded videos
(DVD-RW disc VR mode only).
troubleshooting