Samsung VP-D93, Owner'S Instruction Book

Page: 23 / 112

ENGLISH
Preparation
23
Connecting a Power Source
There are two types of power source that can be connected to your camcorder.
-
The AC Power Adapter and AC cord : used for indoor recording.
- The Battery Pack : used for outdoor recording.
To use the AC Power adapter and DC Cable
1. Connect the AC Power adapter to the AC cord.
2. Connect the AC cord to a wall socket.
Note
■ The plug and wall socket type may differ according to
your resident country.
3. Connect the DC cable to the DC jack socket of the
camcorder.
(When the battery is attached on the set, you should keep
outside the projection of the DC cable.)
4. Set the camcorder to each mode by holding down the tab
on the power switch and turning it to the CAM or PLAYER mode.
To select the CAMCORDER mode
✤
If you want to use this unit as a camcorder, set the mode switch to TAPE position.
✤
If you want to use this unit as a DSC (Digital Still Camera), set the mode switch to
MEMORY STICK position.
00656E VP-D93(i) UK (01~27) 12/1/03 9:10 AM Page 23