Samsung VP-D73, Service Manual

Page: 159 / 170

3-10 Sumsung Electronics
3-10 Motor Capstan, Holder FPC Sub, Arm Pinch Roller, Slide Main
3-10-2 Reassembly
Reassembly in reverse order.
Fig 3-10 MOTOR CAPSTAN, HOLDER FPC SUB, ARM PINCH ROLLER, SLIDE MAIN.
N o t e : When removing and reassembling, must be
correspond to assemble point Gear cam main.
SCREW1 ❶
MOTOR CAPSTAN ❹
SCREW 2 ❸
HOLDER FPC SUB ❷
MAIN SLIDE ❾
GEAR CAM MAIN ❽
MAIN CHASSIS HOOK ❿
WASHER SLIT ❺
ARM PINCH POLLER ❼
SPRING LEVER PINCH ❻
MAIN CHASSIS ❿
ARM PINCH POLLER
MAIN CHASSIS HOOK
3-10-1 D i s a s s e m b l y
1. Remove the screw 1 ❶, lift up the Holder
FPC Sub ❷.
2. Remove the screw 2 ❸, lift up the motor
Capstan ❹
3. Remove the washer slit ❺, separate the “A”
part of spring Lever pinch ❻ to the spring
hook of Arm pinch Roller ❼.
4. Lift up the Arm pinch Roller ❼.
5. Lift up the spring Lever pinch ❻.
6. Turn Gear cam main ❽ in the reverse
direction of Arrow B to the End, and then lift
the slide main ❾ in the direction of arrow D.
“C”
“A”
“B”
“D”
Note 1
: When removing and reassembling, be
careful not to giss the Gear Part.
Note 2
: When removing and reassembling, be
careful not to touch the hand in the pinch
Roller.(Protection contamination)
3. 분해및조립 영문 2001.7.4 2:11 PM 페이지3-10