Samsung VP-D530, Service Manual

Page: 44 / 111

Samsung Electronics 4-31
Alignment and Adjustment
Samsung Electronics 4-31
4-4. CVF Adjustment
Notes : For CVF adjustment, use the buttons on the video camera and the remote control.
After each adjustment step is completed, OSD shows "OK".
EEPROM(ICV02) stores confirmed adjustment value of each adjustment step.
After finishing the adjustment, turn power off.
Note: In service adjustment mode, button names are different from those in customer function control
mode.
STEP 1
1) Connect the power source
(battery/DC cable).
2) Set the "CAMERA/VCR" switch to "CAM-
ERA" position and LCD is close.
3) Camera screen and OSD appears.
4) Open housing of the video camera and
remove tape.
When monitor OSD shows as above screen, CVF
adjustment mode has been activated successfully.
Note : "XX" indicates variable values.
1. How to get into the CVF adjust mode.
2. Functions of each button on the Remote Control
Description
Button
MENU SELECTOR push (Confirm)
EASY (Mode Up)
CUSTOM (Mode Down)
MENU SELECTOR UP (Data Up)
MENU SELECTOR DOWN (Data Down)
Stores changed value in the adjustment mode.
Shift adjustment address to left.
Shift adjustment address to right.
Down value.
Up value.
STEP 2
1. Press and hold the "STOP" button and "EASY"
button on the video camera at the same time for
more than 5 seconds.
2. When monitor OSD appears as shown below,
the adjustment mode has been activated
successfully.
3. Move the MENU SELECTOR to highlight
LCD/CVF ADJ and push the MENU SELECTOR.
4. When changing the adjustment item, please
press the “EASY/CUSTOM” button on the
camera.
5. You can change the adjustment value to move
the MENU SELECTOR up or down.
6. After setting adjustment value, please push the
“MENU SELECTOR” to confirm DATA.
ADJ ITEM
VCR ADJ
CAM ADJ
CAM DISP
DSC ADJ
LCD/CVF ADJ
DSC F/WRITE