Samsung VP-D530, Owner'S Instruction Book

Page: 99 / 110

✤
At the end of a recording you must remove the power source.
✤
When recording with a Lithium Ion Battery Pack, leaving the pack on the camcorder can reduce the life span of the battery.
Hence, it should be removed from the camcorder.
After completing a recording session
1. Slide the TAPE EJECT switch in the direction of the arrow.
■ Opening the cassette door ejects the tape automatically.
■ Please wait while the tape is completely ejected.
2. After removing the tape, close the door and store the camcorder in a dust free
environment.
■ Dust and other foreign materials can cause square-shaped noise or jerky images.
3. Set the power switch to the OFF mode.
4. Disconnect the power source or remove the Lithium Ion Battery Pack.
■ When disconnecting a power supply, separate it in the reverse order
as connecting it, by referring to page 19.
■ Hold down the BATTERY RELEASE button and slide the battery pack in the direction of the arrow.
ENGLISH
99 99
Maintenance
S
1
3 4
2
OFF
After finishing a recording
00510E VP-D530/D590(~109) 3/13/03 8:45 AM Page 99