Samsung VP-D30, Service Manual

Page: 68 / 74

4-4
Alignment and Adjustments
Samsung Electronics
4-4 Mechanical Check and Adjustment
4-4(a) Tension Regulator Adjustment
1) Disassembly
Œ For the removal of the Housing Ass’y.
2) Adjustment
ΠSet to PLAY mode (without cassette tape).
´
Check that the distance between external surface of Holder Loading and center of Arm Tension is 0~1mm.
(Fig. 4-5)
ˇ If necessary, proceed to step 4.
¨ If the Arm Tension is located inside the position specified, adjust the Band Adjust Tension toward arrow A.
(If it is located outside, adjust toward arrow B.)
Note : Check if the Arm Tension can be moved toward arrow C in PB mode.
3) Reassembly
Œ For the removal of the Housing Ass’y.
Fig. 4-5
ARM TENSION
CAP ADJUSTMENT
1 0.3
±