Samsung VP-D200(i), User Manual

Page: 79 / 108

79
ENGLISH ENGLISH
IEEE 1394
IEEE 1394 Data Transfer
●
System requirements
■
CPU : faster Intel ® Pentium III™ 450Mhz compatible.
■
Operating system : Windows ® 98SE, ME, XP, Mac OS (9.1~10.2)
■
Main memory : more than 64 MB RAM
■
IEEE1394 add-on card or built in IEEE1394 card
Recording with a DV connection cable
(VP-D200i/D230i/D250i/D270i only)
1. Set the power switch to PLAYER mode.
2. Connect the DV cable (not supplied) from
the DV IN/OUTport of the camcorder to
the DV IN/OUTport of the other DV
device.
■
Make sure that DV IN appears on the
screen.
3. Press the START/STOP button to begin
REC PAUSE mode.
■
PAUSE is displayed on the OSD.
4. Start playback on the other DV device while you monitor the picture.
5. Press the START/STOP button to start recording.
■
If you want to pause recording momentarily, press the
START/STOP button again.
6. To stop recording, press the (STOP) button.
Notes
■
When using this camcorder as a recorder, the pictures that appear on a
monitor may seem uneven, however recorded pictures will not be
affected.
■
Operations are not guaranteed for all the recommanded computer
environments mentioned above.
●
■
CPU Intel ® Pentium III™ 450Mhz
■
Windows ® 98SE, ME, XP, Mac OS (9.1~10.2)
■
64 MB RAM
■
IEEE1394 IEEE 1394
DV VP-D200i/D230i/D250i/D270i
1. PLAYER
2. DV
DV / DV
DV /
■
DV IN
3. START/STOP /
REC PAUSE
■
PAUSE OSD
4. DV
5. START/STOP /
■
START/STOP /
6. STOP
■
■