9
MAINTENANCE OR REPLACEMENT OF THE FILTERS
INLET FILTER
▲
The secondary filter, located behind the grille in the back of dust bag compartment, protects the motor from
dirt particles.
Do not allow the filter to become clogged.
Suction power reduction or motor damage may result. If filter becomes dirty, pull off the grille and lift out filter.
After cleaning the secondary filter attach it in place.
For HEPA Filter Type
For Micro Filter Type
OUTLET FILTER
▲
Open the dust cover and lift off the grille.
Grasp filter and pull it out with preliminary filter.
After cleaning preliminary filter, reposition new filter
and preliminary filter by reversing this procedure.
Grasp grille filter and pull it out with preliminary filter.
After cleaning preliminary filter, reposition new filter
compartment and preliminary filter by reversing this
procedure.
NOTE :
The filters must be completely dried before being replaced in the dust compartment.
HEPA Filter
Preliminary
Filter
Grille Filter
Micro Filter
Preliminary Filter
DJ68-00093J 6/17/02 12:59 PM Page 10
