Cooling Your Room
1
If necessary, press the button.
Result:
◆
The operation indicator on the indoor unit lights up.
◆
The air conditioner starts up in the mode selected
when the unit was last used.
◆
The indoor unit beeps.
The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
◆
Plugged in
◆
Stopped
lt will start up normally after three minutes.
IM
PORTANT
If the is not displayed at the top of the remote control,
press the
button on the remote control one or more times until it
appears.
Result:
◆
The indoor unit beeps each time you press the
button.
◆
The air conditioner runs in the Cool mode.
2
You can change modes at any time.
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
To adjust the temperature, press the
button one or more times
until the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result:
◆
Each time you press the
button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
◆
The air conditioner starts cooling, provided that the room
temperature is higher than the selected temperature.
◆
If the room temperature reaches the set temperature, the air
conditioner stops cooling, but the fan is still operating.
3
Select the fan speed by pressing the
button one or more times
until the required setting is displayed:
Automatic (rotated : )
Low
Medium
High
Maximum
Result:
Each time you press the
button, the indoor unit
beeps.
4
To control the direction of the air flow, refer to page 15.
5
You must select the Cool mode if you wish to adjust the:
◆
Cooling temperature
◆
Fan speed when cooling
E-
10
