ENGLISH
Selecting the Heat Mode
You can select the Heat mode if you want to heat your room.
You can adjust the temperature and the fan speed when heating.
E-
11
To control the airflow direction, refer to pages 16 and 17.
5
Press the
button to adjust the temperature until the required
temperature is displayed.
You can set the temperature between 61°F(16°C) and 86°F(30°C).
Result:
◆
Each time you press the
button :
- The temperature is adjusted by 1°F
- The indoor unit beeps
◆
If the room temperature reaches 9°F higher than the set
temperature, the air conditioner stops heating, but the fan
operates consistently.
◆
If the room temperature reaches 5°F lower than the set
temperature, the air conditioner starts heating again.
3
Press the button on the remote control until is displayed.
Result:
◆
The indoor unit beeps each time you press the
button.
◆
The air conditioner runs in the Heat mode.
2
You can change modes at any time.
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
1
If necessary, press the button.
Result:
◆
The operation indicator on the indoor unit lights up.
◆
The air conditioner starts up in the mode you selected last.
◆
The indoor unit beeps.
Press the
button to select the fan speed until the required setting
is displayed.
Automatic (rotated : )
Low
Medium
High
Maximum
Result:
◆
Each time you press the
button, the indoor unit beeps.
◆
For the first 3~5 minutes, the fan may not operate to
prevent the cool air from running out of the indoor unit.
It helps to warm the air in your room sufficiently.
4
AQB09JJWC IB_E_DB98-25865 2006.3.27 8:23 PM Page 11
