Fixing the Outdoor Unit in Position
C
OMPLETING THE
I
NSTALLATION
E-
14
Checking and Testing Operations
The outdoor unit must be installed on a rigid and stable base to
avoid any increase in the noise level and vibration, particularly if the
outdoor unit is to be installed close to a neighbour.
If it is to be installed in a location exposed to strong winds or at a height,
the unit must be fixed to an appropriate support (wall or ground).
1
Position the outdoor unit so that the air flow is directed towards the
outside, as indicated by the arrows on the top of the unit.
2
Attach the outdoor unit to the appropriate support using anchor bolts.
3
If the outdoor unit is exposed to strong winds, install shield plates around
the outdoor unit, so that the fan can operate correctly.
❇
Certainly fix up its rubber leg, in order to prevent its vibration and noise.
“X” mm
Rubber leg
“Y
” mm
To complete the installation, perform the following checks and tests to
ensure that the air conditioner is operating correctly.
1
Review all the following elements in the installation:
◆
Installation site strength
◆
Piping connection tightness to detect any gas leakages
◆
Connection wiring
◆
Heat-resistant insulation of the piping
◆
Drainage
◆
Earthing wire connection
◆
Correct operations (follow the steps below)
2
Press the / button.
Result:
◆
The indicator lights on the indoor unit flash at half-second
intervals.
◆
While the indoor unit opens, the indoor unit fan runs to start.
3
Press the / button.
Result:
The outdoor unit operates in cooling or heating mode as
following the room temperature.
4
Air flow direction
Press the / button and check that the
air flow blades work properly.
Model
AQ
✴✴
P8
✴✴
AQ
✴✴
S8
✴✴
SH
✴✴✴
S8
AQ
✴✴
SG
✴✴
AQ
✴✴
PG
✴✴
SH
✴✴✴
SG
SH
✴✴✴
PG(A)
AQ
✴✴
SB
✴✴
AQ
✴✴
PB
✴✴
X
457
489
506
Y
254
300
252
